Weekly programmable digital auto timer – Easy to Use And Maintain – Refine and Excellent – Reliable and Durable

Specifications:
Input voltage: AC110V, AC220V (optional)
Contact voltage rating: 180V to 240V
Switch load capacity: 30A
Power: <1W
On/Off operation: 10 and 10 off (manual/automatic)
Limited time: 1 min to 168 hours
Operating Temperature: -20 to 60
Humidity: <95%
Error: <0.5s/day
Battery (for 220V): 1 AA battery ( included)
Size: 120 x 74 x 51 mm / 4.72 x 2.91 x 2″

Instructions:
NO. 1, clock set (present time): press and hold the “clock” button, then press “Week”, “HOUR” and “MINUTE”.

NO. 2, Set “1 on”: Press the “stopwatch” button and the LCD displays “1 on” in the lower left corner. Then press “HOUR” and “MINUTE” to set “1 on”.

NO. 3, Set “1 off”: Keep pressing the “timer” button and the LCD displays “1 off” at the bottom left. Then press “HOUR” and “MINUTE” to set “1 off”.

NO. 4, Continue to press the “TIMER” button (LCD successively displays “2 on”, “2 off”, “3 on”, “3 off”… “10 on”, “10 off”) so that you can configure all. If you only need 1 on”, 1 off, you should press the “timer” button (the CD successively displays “2 on”, “2 off”, “3 on”, “3 off”… “10 on “, “10 off”) and press “RESET/RECALL” to set all other “on” and “off” to “– : –” instead of “0” 0:0.00 cm (shown on LCD ).

NO. 5, After setting, press the “CLOCK” button so that the LCD displays the current time. Or if no button is pressed within 30 seconds, it will automatically display the present time.

NO. 6, When connected to the circuit, the red light indicates whether the circuit is powered and the green light indicates whether the switch is closed.

Packaging includes:
1 x timer switch